1 - Introduction (56.49 MB)
2 - Basic Interface (67.66 MB)
10 - Reviewing Results for Fire Flow Scenario (14.44 MB)
11 - Creating New Physical Alternative (19.1 MB)
12 - Reviewing Results for Fire Flow with new Diameter Scenario (28.02 MB)
3 - Prepare Network Layout (37.91 MB)
4 - Lay Network (29.08 MB)
5 - Use of Properties Manager (15.07 MB)
6 - Use of Flex Tables (13.85 MB)
7 - Use of Demand Control Center (5.65 MB)
8 - Compute and Review Results (19.15 MB)
9 - Creating Fire Flow Demand Alternatives (8.2 MB)
13 - Using Model Builder (30.68 MB)
14 - Data Validation and Cleaning (12.75 MB)
15 - Adding Junction Demands (4.66 MB)
16 - Review Results and Shortcomings (9.84 MB)
17 - Element Morphing (21.94 MB)
18 - PRVs Pump and TankData Input (21.48 MB)
19 - Compute Daily Demand (8.94 MB)
20 - Additional Demand At J5 (14.7 MB)
21 - Review Results (39.28 MB)
22 - Exercise (306.88 MB)
23 - Exercise (368.48 MB)
24 - Max Day Pressures Analysis (30.1 MB)
25 - Fire Flow Calculation (27.6 MB)
26 - Auxilary Fire Flow Calculation (20.29 MB)
27 - Exercise (156.74 MB)
28 - Setting up Pumps (35.69 MB)
29 - Scenario 1 Tank Control (38.39 MB)
30 - Scenario 2 Constant Speed Pumps with No Tank (34.77 MB)
31 - Scenario 3 Variable Speed Pumps with No Tank (17 MB)
32 - Energy Costs (13.77 MB)
33 - Setting up Model Builder (31.35 MB)
34 - Building the Model (7.37 MB)
35 - Reviewing the Model (24.26 MB)
36 - Trex (44.36 MB)
37 - Load Builder (31.54 MB)
38 - Associating Demands (62.99 MB)
39 - Thiessen Polygons (40.97 MB)
40 - Review (105.95 MB)